Die Installation der Service Packs muss mit lokalen Administratorrechten durchgeführt werden. Installation of Service Packs must be carried out with Administrator rights. Requirements for SP2/Voraussetzung für SP2: Smap3D Plant Design 2020 Release or SP1 Supported CAD systems: Solid Edge 2019/2020 with latest maintenance pack SOLIDWORKS 2019/2020 with latest service pack ! WICHTIGER HINWEIS: Dieses Service Pack aktualisiert Arbeitsplätze mit Smap3D Plant Design Software (incl. Client License Manager). Auch der Lizenzserver muss mit Hilfe dieses Service Packs aktualisiert werden, falls eine neuere Version des Lizenzservers im jeweiligen Service Pack enthalten ist. Der Lizenzserverdienst benötigt für den Neustart nach dem Update je nach Hardware ca. 10 bis 60 Sekunden. ! IMPORTANT NOTE: This service pack updates Smap3D Plant Design clients (incl. client license manager). It must also be applied on the License Server if this service pack should contain a higher version of the license server. Allow up to 60 seconds (depending on hardware) for the license server service to restart after update has finished. ============================================================== Contents SP2 (17.20.200.56): ============================================================== SP2 contains Smap3D Parts Management 17.20.200.6 P&ID 21.0.6.1 License Client Manager 5.20.100.5 (same version as in SP1) License Server Manager 5.20.100.5 (same version as in SP1) * Enhancements * General 37278 New option which allows do not delete redundant pipe files from file system is added. 37594 Added SolidEdge Community.Addin license information Isometric 37318 New option in Isometric for output folder when using file name generator 35712 Isometric has an option to preserve UNIQUE-COMPONENT-IDENTIFIER 37193 Added translations for tooltips in Isometric forms "Add new feature" and "Multi edit" Piping 37415 No welding gaps shoudl be created at the coordinate systems of the "Welding component" 36213 New Piping API for renaming of pipelinepaths was added to the PlantDesing.Connector.dll 37277 Create new QP methods for 88° and 92° elbows 36898 Added new wildcard pattern %PIPELINEPATH_NAME% for PipelinePath to the FNGAssemblyProperties plugin * Changes * P&ID 31512 ToDo list uses new common interface for communication with P&ID 29233 ToDo list allows update assigned symbol if reference designation was added. 37079 To-Do list plausibility result message can be very wide, if many results are displayed 37233 The ToDo list Create subassembly function creates a subassembly also if a subassembly is in the Edit mode. 35768 The Delete P&ID stream function is added. 36675 Pipelines don't have complete enumeration of pages they lay on 37120 It was possible unassign pipeline even from assembly it is not in. 26744 It is possible to write customer plugin to connect external P&ID 37088 If there are more object groups defined for one pipleine then it is displayed together divided by comma 31126 Deleted symbol or tube is removed from To-Do list tree view after delete from CAD Setup 37240 Scalypso updated to version 2.20.6 * Repaired bugs * Bending Simulation 37163 Fixed: Several special case assemblies did not work with Bending Simulation General 37481 Switching on PDM ribbon causes hiding of our Piping and To-Do list ribbons 37227 Fixed minor installChecker issues for PD Addon 36739 Config files were in the wrong folder Isometric 37300 IDs of components in Isometric are no longer read if Repetability is off 37483 Fixed situation in Isometric with CLAMP component at the end of a pipeline 37284 Fixed lapjoints causing validation errors in Isometric step 2 37257 Fixed lapjoints causing validation errors in Isometric step 2 37093 Fixed duplicate weld in Isometric if the weld is at the boundary of two pipelines and welding gaps are used 37081 Fixed "UNABLE TO LOCATE COMPONENT FROM START COORDINATES" in Isometric for pipelines with defined flow direction 37465 Crash of Isometric from step 1 to step 2 just for the specific assembly P&ID 29308 ToDo list freezes when symbols in a unit point to the same unit 37395 To-Do list option "Component" checkboxes for Symbol type and Equipment type removed 37234 To-Do list - staying in active subassembly the command hide signal points does not work correct 37470 Object groups were not displayed in the properties table 37103 Object groups were not displayed correctly for tubes which are on several pages. 37298 Crash in ToDoList when more points to show/hide is selected and function show/hide is being performed 36680 Already assigned pipeline change names after ToDo list refresh Piping 37587 To-Do list does not crash after the refresh from the P&ID Project 36995 The Create route function was possible to run multiple times. 36586 Show Piping help on F1 while ribbon command is activated in SolidEdge 37581 Shape pipes are checked out with PDM Studio 37177 Piping ribbons are loaded to sketch environmnet althoug the Piping singlewindow is switched off in PDAdmin toolbars 37416 No error message that components overlap 37296 In SE 2020 /Piping ribbon two buttons/functions of "SWX only" are visible 34220 Automatic split lines with a branch line Setup 37389 SELicense.ini was missing 37248 Fixed minor installation checker issues in ScanToCAD check ============================================================== Contents SP1 (17.20.100.36): ============================================================== SP1 contains Smap3D Parts Management 17.20.100.11 P&ID 21.0.4.11 License Client Manager 5.20.100.5 License Server Manager 5.20.100.5 * Enhancements * General 36732 Added help source switch to all application main forms Isometric 32993 It is now possible in Isometric to map assembly properties to component (and weld) attributes 35712 Isometric has an option to preserve UNIQUE-COMPONENT-IDENTIFIER 27375 Additional items are now shown as sub nodes in Isometric Component tree P&ID 36696 Splitter is added to the To-Do list options 28977 P&ID ToDo List - Added assignment status column 31483 It is possible to assign more then one 3D pipeline to one 2D pipeline 35158 P&ID To-Do list should write the P&ID name value to SWX component reference property Piping 37011 Subkeynames are now translated on pipe specification load to current language 36349 New KEY names and new adapted QP methods for Concentric component and at function Split route 36351 Hydraulic fitting stop plug causes the pipe not to be generated. 33549 Added new Icon for the function "Flip component" 34607 Added material to the insulations setting in the PipeSpec * Changes * General 36707 When Piping and To-Do list in SE 2020 are not active, a lot of buttons in ribbons are NOT greyed out 36474 Change the default UI style to Office 2016 36060 Remove Install toolbar button from Toolbar page P&ID 31512 ToDo list uses new common interface for communication with P&ID 34578 Object groups are filtered also for multipipeline. 37152 The object group is shown at multipipeline level 26524 Pipeline nodes in ToDo list has different icon in accordance if insulation is generated or not. 26744 It is possible to write customer plugin to connect external P&ID 30224 It is possible to run the Update function for multiselected rows 31126 Deleted symbol or tube is removed from To-Do list tree view after delete from CAD 28657 Multiselection for function Show from/to points is be possible Piping 36888 Add ribbon commands for construction lines+remove text of all small icons * Repaired bugs * General 36828 Wrong icon for "Show all parts" function in SolidEdge 35962 Plant Desing Administrator - The language dropdown and the unit system dropdown are always filled 36850 Licensing Client and Server updated to MP1 36759 Bending Simulation now shows online help too 33377 Added support for assemblies in 3D Preview Help 36933 Fixed online help for CADless installation 36901 Fixed help ling in QConfig Isometric 37169 Fixed bug when split window collapses one of the panels on window minimalization 29700 Default file name generator now uses top assembly name as prefix/suffix P&ID 36879 Wrong icon for Unassign pipeline in SolidEdge 36762 Flow direction was set without proper placing of a pipeline Piping 36692 Tabs of Piping single window should be located side-by-side 36900 Standard parts provider and PipeSpecs are automatically updated if the PDM2020 is installed 36586 Show Piping help on F1 while ribbon command is activated in SolidEdge 36979 QuickPlace Method failed at recalculate region or pipeline, at manually placed flanges 33771 Piping did not place parts with the Russian alphabet in the path. 36103 Only one subassembly is possible to create in Teamcenter 34125 In CS Wizard CS Y-Axis is rotated by 180 instead of 90 degrees 37002 Functions "Place part" and "Replace part" do not crash anymore 36776 Function Flip component(s) does not work in certain workflow 31210 Fixed minor visual artefacts in 125% font size setting 32539 Clear button in Pipe Specification Editor no longer produces confusing message 36943 Blind flange is placed on sketch line connection to other assembly in some cases 31868 Union is not replaced during edit 36614 File name generator returned wrong name in the case of changed working folder 36570 Empty pipe class was used when lines were drawn by the native line function. ScanToCAD 35959 Configuration folder is created during setup, if it does not exist even when only ScanToCAD is installed Setup 36893 The license file choosen during the setup is now correctly used when upgrading from PD2019 to PD2020 37174 PlantDesign.Connector.dll is registered during the setup